Soldering irons are hot.
I know because I just touched one.
This was going to be an excited description of my new electronics stuff I bought, but typing with one hand in a glass of water slows you down somewhat, so this might be a brief post.
See.
Popular Posts
-
You see CHIFT PIST a lot in the aquaponics forums and it means "constant height in fish tank, pump in sump tank". And its a very g... -
The bell siphon was a clever thing for someone to design, and as such you feel a bit of that "clever" rub off onto you when you m... -
A "bell siphon" is a device that automates the flooding and draining of an aquaponics grow bed, even though the pump is adding wa... -
Apparently, marron come in two varieties. Hairy and not so hairy. Cherax cainii (smooth) and Cherax tenuimanus, or Margret River marron (hai... -
A while ago I tried to make a fish fed fish feeder design that would allow the fish to feed themselves. I think It's made. I say &q... -
Painting lures is easier if you don't know how. I don't, so I'm already well on my way. I started by owning a printer. That ... -
The good thing about growing things like potatoes in aquaponics is they grow like crazy. The problem with growing things like potatoes in ... -
Wire is one of the greats. It's power lies in its ability to be made shorter and apply great tension, with the application of many small... -
With a little practice its possible to make a screw. If you bend your wire into an eyelet, its possible to make a screw in eyelet. The use... -
If you pump air down into a submerged tube, when the bubbles rise to the surface, by virtue of the fact that they take up some space, they c...
Yep. Not real pleasant. I've accidentally burnt myself with a soldering iron a couple of times in the last month. Pretty minor ones this time, but I do have a permanent scar from a previous incident... luckily that is only a small scar on the side of one finger, so completely unnoticeable unless you look for it.
ReplyDeleteHope you didn't do too much damage.