Fire - Tin can stove success

I decided to make another tin can stove with the new design, but this time I thought I'd make it work.

A major design flaw of the first attempt was not actually the bit where the tin ripped in two, but was actually the bit where I was thinking upside down.

The previous version had grooves that would only reach the bottom.

That was never going to work.









This time I made the grooves in such a way as they would still be grooves when they reached the top.

Much more likely.

So, the top (open ended) half of the can is bent like this, and made to sit into the bottom (still with the base on) of the can.




All up this process takes only 5 minutes or less.

The zig-zag bit is placed zig-zag down into the half on the left.

It doesn't even need to be a snug fit.

Just drop it in place.





The result is, that when you light the alcohol and wait a few seconds for the device to heat up, it vaporizes the spirit within the zigs and the zags of the two walls created by the can halves, and is emitted as gaseous fuel through the top of the (now inverted) zig-zag bits.

Like this.

Perfect!

And quick.

A quicker, more durable ethanol stove.

A total success.




Much better than the last attempt.

Thanks to whoever first thought of this method of making a little spirit stove, that enable the happy camper to knock out a stove within a few minutes of dumping a can's contents into a pot.

Now all I need is canned food that actually tastes good.

And perhaps the ability to make a tin can.

I have no idea how to make a tin can.

But I'm not going to make a can as a "Thing" because nothing good ever came out of a can.





120 Things in 20 years - No can was hurt in the making of this post.



And sweetened condensed milk comes in a can, and that stuff is delicious.

But I still don't want to learn how to make a can.




















No comments:

Post a Comment

Popular Posts